REBER Professional 55 Stainless Steel Vacuum Machine 9712N

REBER Professional 55 Stainless Steel Vacuum Machine 9712N

REBER Professional 55 Stainless Steel Vacuum Machine 9712N professional with external suction. Structure made entirely of stainless steelwhich guarantees the highest levels of hygiene and cleanliness.

The machine can operate continuously (follow instructions). It is also equipped with internal electronic board which offers the possibility of operating in automatic and manual modes.

Features

This model is equipped with potentiometerwhich allows the welding power to be adjusted. This is adjustable from a 'less powerful' to a 'more powerful' level. The choice is made on the basis of the thickness of the bags used.

With ROYAL PACK bags, the potentiometer should be set between orange and red for the first 3-4 seals and then can be set to yellow-orange for subsequent seals. With less thick bags, the potentiometer can be set to lower levels.

La REBER Professional 55 The stainless steel vacuum machine 9712N is equipped with an electronic board that stops the machine in the event of overheating to prevent excessive temperatures.

As a result, the reduction in welding power speeds up the vacuum and suction cycle. This allows you to work for longer.

The machine already includes in the package the accessory for vacuuming the containers valved.

Technical Specifications

Below are the main technical features of the REBER Professional 55 Stainless Steel Vacuum Machine 9712N:

• Stainless steel casing
• Professional vacuum gauge
• Maintenance-free, self-lubricating double-body piston pump
• Vacuum level: -900 mbar
• Suction capacity: 40 l/min.
• Maximum power consumption: 340 W
• 58 cm sealing bar, width 3 mm.
• Energy-saving system with electronic control of power output during welding
• Welding power adjustable electronically and with potentiometer
• Electronically adjustable SUPERVOY function
• Continuous cycle operation
• Fully automatic operation or operator-selectable manual mode
• Air intake for the use of the supplied container and lid attachment
• Maximum speed and ease of use
• Can also be used with smooth bags with bellows or central channel

Instructions for use

This machine is extremely powerful. To use it, follow these simple instructions:

• place the food in the bag, leaving at least 7-10 centimetres of empty space between the opening and the food
• place the open part of the bag in the vacuum chamber, marked by the black seals
• close the vacuum chamber by dropping the lid of the 9712N vacuum machine onto the bag
• Operate the machine with the green button (in case of manual operation, press and hold the button)
• exert slight pressure, especially at an early stage, on the lid of the 9712N vacuum machine
• wait for the machine to finish the suction and welding process
• do not force the lid to reopen. The REBER Professional 55 Stainless Steel Vacuum Machine 9712N is equipped with a solenoid valve for automatic lid release at the end of the suction and sealing cycle
• In the case of using a very large and long bag and, more generally, to facilitate the vacuuming of the machine, as soon as the vacuum procedure has started it may be useful to raise the bottom of the bag a few centimetres. In this way, by aligning it with the level of the machine, the vacuum process will be smoother.