Reber meat grinder No. 22 electric 600 W HP 0.80 9500NC short model

Reber meat grinder No. 22 electric 600 W HP 0.80 9500NC short model

Reber meat grinder No. 22 electric 600 W HP 0.80 9500NC short-necked model enables large quantities of meat to be minced in a short time and without effort. It is a machine with forward and reverse gears and an engine with a power of almost 1 horsepower.

You can also buy thewarranty extension for a further 3 years for this product!

For more information visit our page on electric and manual meat mincers.

Technical specifications

• Short-neck body no. 22
• Electric induction motor, continuous duty
• Gearbox with oil-bath metal gears, requiring no maintenance or replacement/replacement
• The oil used is of the 'Long Life' type and is suitable for accidental contact with foodstuffs
• Stainless steel plate
• Hourly output: 70/140 kg
• Plastic pestle suitable for food contact included
• Also suitable for bagging with the appropriate accessories (three bagging funnels of 15, 20 and 25 mm and the support ring can be purchased separately)
• Cooling fan, fan cover and switch-condenser box made of plastic material
• Protection class IPX5
• Meat mincer body, propeller and ring nut made of tin-plated cast iron for food use
• Reversing switch
• Plate with 8 mm diameter holes and self-sharpening knife supplied in hardened steel
• Optional plates with different hole diameters are available in hardened steel and stainless steel
• Other accessories applicable to the gearmotor: tomato squeezer, grater, pasta press, kneader
• Weight: Kg. 20
• Dimensions: cm. 47x23x24(h)

Description

Reber meat grinder 22 electric 600 W HP 0.80 9500NC is the short-necked meat-passer model No. 22, made of tin-plated cast iron.

Reber's Professional Integrated System also allows the use of different accessories on the same motor unit. Accessories are easily installed without having to dismantle either the accessory or the motor. Full compatibility with other accessories in the Reber range.

All types of accessories applicable on REBER motors are available in the ElettroWebStore!

This Reber electric meat grinder is equipped with forward and reverse gears. The reverse gear is used to unlock the motor in case there is too much meat blocking the propeller. In fact, it can often happen that nerves and tougher pieces of meat can coil around the propeller and fill the body of the grinder. In such cases, it is advisable to engage the reverse gear so that the product can be released.

The plate and knife of this mincer are made of tempered carbon steel. This means that they can rust if not properly maintained.

The short neck ensures that the meat being processed leaves the machine immediately, preventing it from getting too hot. Obviously, less meat will enter the body and, therefore, it will have to be inserted more often. Therefore, if you want to avoid this minor inconvenience, you should purchase theequivalent long-neck model 9500N.