Sicar infrared methane stove ECO40 grey 4200 Watt - PROMOTIONAL OFFER!

Sicar infrared heater methane ECO40 grey 4200 Watt

Sicar methane infrared stove ECO40 grey 4200 Watt is a wall-mounted stove produced entirely in Italy. In fact, Italian production guarantees the quality of the materials used, excellent thermal performance and safe gas contact. Consequently, overall the Sicar product is synonymous with the highest quality 100% made in Italy.

ATTENTION: STOVE INTENDED EXCLUSIVELY FOR THE ITALIAN MARKET! IT IS THEREFORE NOT POSSIBLE TO SHIP THE PRODUCT ABROAD!

LAST PIECE AVAILABLE!

 

 

 

 

 

Product features

• Infrared burner 3 ceramic tiles
• Power adjustment on 3 levels (single tile/double tile/double tile together)
• Scratch-proof epoxy coating
• Heat-resistant lid
• Piezo ignition
• Wall connection
• Bottom with feet
• Valve tap
• Double safety 'stop gas' with atmosphere analyser
• Available colours mod. Eco 40: grey, blue
• External hex connection fitting 21×28-1/2″x1/8″
• CE marked stove
• Made entirely in Italy

 

 

Technical specifications:

• Operating pressure: 20 mbar
• Hourly consumption: 0.410 cubic metres per hour
• Maximum heatable volume: 110 cubic metres (roughly equivalent to a room of 35-40 square metres)
• Dimensions (depth x height x width): 425x150x640 mm
• Net weight: 6.5 kg
• Heat output: 4,200 watts

 

 

The photo shows how the ECO40 natural gas stove can be wall-mountedrespecting the manufacturer's recommended height of about 15-20 cm from the ground.

 

What are the characteristics of Sicar infrared heater methane ECO 40 grey 4200 Watt

Sicar infrared heater methane ECO 40 grey 4200 Watt is a heating system produced entirely in Italy with Italian materials and workmanship, by an Italian company! This is very important because this item goes in contact with gas and is used for heating in winter! In fact it is imperative that contact with the gas is safethat there is no leakage into the environment and that the materials from which the stove is made are suitable.

Italian production ensures that the sheets and components are all certified for use in a heating system and are of quality. Furthermore, this ensures that they are spare parts available and technical support centres in the territory in case of problems. Furthermore, this product is more robust than imported ones. This ensures greater durability and improved performance and comfort over time.

Le painting are carried out in compliance with the relevant regulations. Thanks to this search for quality materials, the product does not produce unpleasant odours due to chemical reactions between the paint and the gas.

The double stop-gas systemIt is also designed and engineered in Italy. This ensures that the control of flame extinguishment and carbon dioxide leakage is under control.

Methane gas stoves do not need cylinders and this allows them to be less cumbersome.

The SICAR ECO 40 stove is CE-marked and produced in Italy at SICAR's headquarters.

 

What are the installation requirements for a methane stove?

In order to benefit from this type of heating, it is essential that the place where you live is reached by the methane network. If this is possible, the second step is to make the connection by contacting an appropriate supplier (if there is no coverage, you will have to opt for LPG gas stoves, such as Sicar LPG Catalytic Stove EURO80 2500 Watt or Sicar infrared heater LPG EURO90 grey 4200 Watt).

Extreme care must be taken where stoves without flues are installed. In fact, the purpose of the chimney is to allow the gases produced by the stove to be expelled during operation.

La SICAR stove is not equipped with a chimney. It is therefore necessary that the place where it is installed has permanent openings for air exchange. It is therefore not suitable to serve as the primary heating system of the place where it is installed.

It is not recommended to install the natural gas stove in rooms such as bedrooms, bathrooms, studios, basements, motor homes, caravans. In addition, it is not recommended to install the tank stove in rooms with a surface area of less than 15 cubic metres.

Finally, remember that the methane is a lighter gas than air. Despite this, in closed rooms without ventilation, it tends to stagnate and saturate the air.

 

What does it mean that the Sicar ECO 40 stove has double gas leakage protection?

This product is equipped with a dual gas control system to ensure the safety of users. In particular, thehe stove switches off automatically if a carbon dioxide content of 1.5% or more is detected. In this way, the stove can detect fumes that can be extremely dangerous to the safety of users.

In addition, the product automatically interrupts the gas supply in the event of the stove accidentally shutting down. In fact, in the event of an accidental shutdown, in a normal stove the gas would continue to be supplied. In this Sicar stove, on the other hand, thegas supply is immediately interrupted in the event of a shutdown.

In fact, the Sicar stove is equipped with an atmosphere analyser which allows monitoring of the above parameters.

 

What does infrared heater mean?

La infrared heater is a product that uses infrared technology to heat the room in which it is installed. This technology has the characteristic of being more efficient than normal heaters and of not moving air (and dust). Consequently the level of comfort achieved with this type of stove is higher than with other radiant heating systems.

It was measured that infrared heaters can generate up to 96% of heat from absorbed energy. They are therefore particularly efficient. In fact, a conventional stove has an average efficiency of only 50%.

In addition, the infrared radiation emitted by this stove follow the same principle as those emitted by the sun. They therefore heat by passing through the air but without moving it. Radiators, on the other hand, generate convective motions in the air which, as it heats up, rises and lets the cooler air in the room descend. In fact, this type of stove generates a pleasant feeling of warmth when encountering the flow heated by them and do not dry the air and do not raise dust.

This same technology does not generate health problems. In fact, it is also used to heat saunas!

Infrared stoves heat somewhat like the sun does, i.e. by radiation. By not moving air through fans they consume much less energy than conventional stoves.

 

Who is Sicar?

Sicar is a 100% Italian company, founded in 1981. All Sicar products are made in Italy, with Italian components, in the factory in Guastalla, in the province of Reggio Emilia. In this plant the company produces and offers a wide range of catalytic and infrared, cylinder and wall-mounted, ventilated, electric stoves with steatite or quartz, and convectors. The Sicar brand has established itself over time thanks to the quality of its products and a nationwide technical assistance service.

 

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

 

Delivery time

This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

 

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

 

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!