Reber buffer gasket bagging machine red 3-5-8 kg 6506B

Reber buffer gasket bagging machine red 3-5-8 kg 6506B

Reber buffer gasket bagging machine red 3-5-8 kg 6506B is a spare part needed to replace the gasket of your Reber filler, which has worn out with time and use. The gasket, made of rubber and coloured red, is placed between the two Teflon elements that make up the filler pad, held together by a screw.

In order to facilitate proper flow of the filling inside the filler tube, the seal should be lubricated with oil before use. For further information, please consult the Reber bagging machines maintenance and operating manual.

This product is applicable for Reber 3 kg, 5 kg and 8 kg bagging machines.

Reber bagging machine models that fit the 6506B buffer gasket

The fillers that are compatible with the red 3-5-8 kg 6506B filler buffer gasket replacement are practically all 3-litre, 5-litre and 6.8-litre models (the one also called 8 kg).

The product codes are as follows: 8950N, 8951N, 8960N, 8961N, 8952N, 8962N, 8956N, 8966N, 8970N, 8971V, 8962V, 8970V

Technical characteristics and measurements

Below are the main product features of the REBER red 3-5-8 kg buffer gasket filler 6506B:

• red rubber gasket suitable for food contact
• measurements: outer diameter 15.2 cm; inner diameter 9.4 cm; thickness 0.7 cm
• weight: kg 0.1
• specific replacement part for Reber 3-, 5- and 8-kg bagging machines, as per models above
• the product will be shipped as shown in the pictures, in an envelope with the corresponding Reber barcode

Description

This replacement is specifically for Reber's 3 kg, 5 kg and 8 kg bagging machines. It consists of a red rubber gasket, which is placed around the pad. The pad is the part that pushes the meat by turning the crank towards the outlet of the filler.

The seal of this insertion is placed around the pad and serves to ensure that the pad itself adheres well to the stainless steel bagging tube, in which the meat is contained.

The Reber buffer gasket for bagging machines is consumable material suitable for contact with foodstuffs. For this reason, once purchased, it cannot be returned.

Additional spare parts can be purchased separately

Further spare parts and accessories for Reber bagging machines can be purchased at Elettrowebstore:

• Small toothed gear pin for old bagging machines code 6511OLD
• Large aluminium gear for bagging machines 5-8 kg code 6507A
• Set of 4 filling funnels for bagging machines mod. 6508A
• Crank handle for 3-5-8 kg bagging machines code 6503MA
• Rack support for bagging machine kg. 5/8