Reber fan cover for geared motor
Reber fan cover for gearmotor is an original Reber spare part, different sizes depending on whether your gearmotor is No. 3 HP 400/450 Watt, No. 5, HP 0.40 500 Watt or HP 0.80 600 Watt. Please check the measurements on this page and select from the drop-down menu the fan cover suitable for the geared motor in your possession.
The fan cover serves to protect the fan housed at the rear of the geared motor. The fan cover is attached to the motor by means of 4 screws for the 3 HP 400/450 Watt and 5 HP 600 Watt geared motors, NOT included with the fan cover you will receive. You can use the screws already supplied with the fan cover you are going to replace, or buy them at the hardware store. The fan cover for geared motor No. 5 HP 500 watts is attached without screws..
The fan cover is made of plastic, black in colour.
If necessary, it is also possible to order fan covers with fixing methods other than those expressly indicated above. In that case Contact us for more information on availability and shipping times.
Description
This original Reber spare part for geared motors No. 3 and No. 5 is suitable for replacing the supplied fan cover with the one in your possession that is damaged or worn.
Please note: in addition to the fan cover, no other spare parts are included, such as the 4 screws for fixing to the geared motor. Compatibility is only guaranteed for the indicated Reber brand gearmotor types.
Additional spare parts and accessories applicable to REBER gear motors are available in the ElettroWebStore!
Technical specifications
- Fan cover dimensions code 1072A for Reber HP 0.80 600 Watt gear motor: diameter cm. 16.1, depth cm. 7.4, thickness mm. 2. Weight: 0.1 kg
- Fan cover dimensions code 1071A for Reber HP 0.40 500 Watt gear motor: diameter cm. 14.5, depth cm. 6.2, thickness mm. 3. Weight: 0.1 kg
- Fan cover dimensions code 1070A for Reber HP 0.30 400/450 Watt gear motor: diameter 12.5 cm, depth 5.1 cm, thickness 2 mm. Weight: 0.1 kg
- 4 holes for screw fastening on fan covers for Reber HP 0.80 600 Watt and HP 0.30 400/450 Watt geared motors
- the fan cover for Reber HP 0.40 500 Watt geared motor has no holes, it clicks into place
- All fan covers are made of black plastic material
| Weight | 0,1 kg |
|---|---|
| Dimensions | 16,1 × 7,4 × 16,1 cm |
| Version | no. 3 for gearmotors HP 0.30 400-450 W with screws 1070A, no. 5 for gearmotors HP 0.80 600 W with screws 1072A, no. 5 for gearmotors HP 0.40 500 W without screws 1071A |
You may also like…
