Reber spremipomodoro passapomodoro elettrico 150 Watt 10900N

Reber spremipomodoro passapomodoro elettrico 150 Watt 10900N

Reber spremipomodoro passapomodoro elettrico 150 Watt 10900N è un passapomodoro elettrico REBER con motore di nuova generazione. Assorbe solo 150 Watt ma svolge lo stesso lavoro di uno spremipomodoro 9008N con motore HP 0,30 da 450 Watt. Il motore è carenato inox e gli accessori sono in acciaio inox: massima pulizia, igiene e design.

Funnel and chute are stainless steel, cast iron body painted with epoxy paint suitable for food contact. Stainless steel cased motor. The propeller is made of acetal resin suitable for contact with foodstuffs. The size is that of a No. 3 tomato press. The motor is energy-saving because it only draws current when under load. Conversely, when operating with no load, it consumes the minimum amount of current needed to turn and stay on. In this way, it does not produce excess heat

What do you mean that the tomato squeezer 10900N has similar performance to the tomato squeezer 9008N?

Lo tomato squeezer 9008N is a product specifically for tomato puree, with a motor that draws 450 watts continuously from the electrical system and generates a maximum output power of 0.30 HP. This tomato puree machine is equipped with a finned motor, i.e. not covered by a fairing, plastic fan cover and is not energy-saving. This means that it always draws the same amount of energy, whether it is running empty or at full load. If it runs idle, it tends to spoil more, because the energy absorbed is not converted into work but inevitably into heat.

Al contrario, il passapomodoro 10900N riesce a svolgere le stesse funzioni di spremitura (ma anche di tritatura della carne e di grattugia) del motore associato al 9008N, ma con il beneficio di consumare molto di meno! Infatti, assorbe corrente dall’impianto esclusivamente se messo sotto sforzo. Pertanto, l’indicazione di consumo di 150 Watt è indicativa e riferita all’utilizzo medio.

In addition, Reber electric tomato squeezer No. 3 energy saving 150 Watt 10900N has the motor covered by the stainless steel casing! This makes the product much easier to clean and much more hygienic, because stainless steel stains less and is easier to clean. In addition, the design is better and the product has no plastic weak points (unlike the back cover of the 9008N which covers the cooling fan.

Technical specifications

Below are the main technical characteristics of the Reber 10900N

• Stainless steel shrouded motor without fan cover
• Energy-saving electric motor with a power consumption of only 150 watts
• Engine power: approx. 0.30 HP
• The engine is equipped with a forward gear only.
• Weight: approx. 7.5 kg
• Filter cone, drip tray, splash guard, large capacity funnel made entirely of AISI 304 stainless steel
• Cast iron body painted on the inside with epoxy powder paint baked at 300 °C, suitable for food contact
• High-strength acetal resin propeller (over 220°), specific for food contact
• Steel and nylon 6.6 tow pin
• Applicable accessories on request: grater, meat grinder, juice extractor, vegetable slicer
• Article certified for food use that fully complies with Italian and European regulations on household appliances

Description

Reber spremipomodoro passapomodoro elettrico 150 Watt 10900N è uno high quality and powerful tomato squeezer.

In fact, it consists of a 150 watt motor that generates 0.30 horsepower. The main feature of this product, apart from being constructed with attention to detail and overall design, is the fact that it is designed to save energy during occasional workloads.

In addition to being used as a tomato press, this product can also easily be used to make jam. In this case, it may be useful to purchase filter cones with smaller or larger holes than the one supplied (depending on the type of recipe to be made).

All types of mincing accessories applicable on REBER motors are available in the ElettroWebStore!

Accessori applicabili a Reber spremipomodoro passapomodoro elettrico 150 Watt 10900N

The 10900N is a No. 5 flange product. Consequently, it can apply all No. 5 accessories in the REBER range.

• Grater No. 3 optional
• Juice extractor
• Vegetable slicer
• Meat mincer No. 5 aluminium and plastic optional

This model of tomato squeezer cannot apply the pasta press accessory nor the kneader accessory. In fact, although the flanges are compatible with pasta press accessory no.3 and kneading machine accessory no.3, this model has a motor operation that does not guarantee exceptional performance with these accessories. Therefore, they can only be used if and only if the user foresees occasional and not continuous use of such accessories and if the dough produced has a high moisture content.