REBER carbon steel manual mincing knife

REBER carbon steel manual mincing knife

REBER manual meat mincer knife in carbon steel is the ideal complement for Reber manual meat mincers that mount the bodies of mincer No 5 - No 10 - No 12 - No 22 - No 32.

The knife is self-sharpening and is available in various sizes, to be selected according to the type of mincer you have (No. 5 - No. 10 - No. 12 - No. 22 - No. 32). You can choose the desired type of knife from the drop-down menu.

This knife is included as standard in the purchase of Reber manual meat mincers. It is therefore possible to purchase a replacement knife through this advertisement.

Attention: the photo is only an identification of the knife you will receive! PRODUCT AVAILABLE ON ORDER!

Technical specifications REBER carbon steel manual mincing knife

• Made of C55 carbon steel
• Designed for use on Reber manual mincers that mount mincer bodies No. 5 - No. 12 - No. 22 - No. 32
• Suitable for food contact
• Packaging in blister packs or cardboard boxes, bearing the bar code of the article

Description REBER carbon steel manual mincing knife

REBER carbon steel manual meat mincer knife is the ideal complement for Reber electric meat mincers that mount the bodies of mincers No. 5 - No. 10 - No. 12 - No. 22 - No. 32. The C55 carbon steel has a degree of hardness equal to stainless steel; therefore the product life and cutting pattern are very similar to those of stainless steel. Visually the surface of the knife gives a satin/matt effect.

It is important to always check that the knife is sharp. In fact, if the knife comes into contact with pieces of bone or rind, the blade edge may be damaged and the knife will have to be resharpened.

The knife must be mounted inside the body of the mincer, with the sharp side facing the plate.

The desired knife size can be selected from the drop-down menu.

Modalities of use REBER manual meat mincer knife made of carbon steel

Before use, the Reber manual mincing knife should be washed with lukewarm water, taking care not to cut itself. Immediately after washing, the dried thoroughly and put into use.

After use, the knife should be washed again with lukewarm water and mild soap, and then dried quickly.

Through the first cleaning, dust, lamination and packaging residues can be removed. Any residues of packaging material are normal and go away after the first wash.

The knife and mincer plates arrive lightly greased with oils suitable for food contact. The application of food-grade oil prevents rusting. It is important to re-grease the Reber electric meat mincer knife made of carbon steel with food-grade oil. It can, in fact, rust. Applying a layer of oil, on the other hand, prevents oxigen attack and the formation of rust.

Rust formation is normal. It is the end user's responsibility to prevent rust from forming. In case of rusting, the product CANNOT be replaced because this is not a defect, but a normal deterioration of the material due to lack of proper maintenance.

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

Delivery time

This product is NOT always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 15 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!