REBER INOX knife for electric meat grinder is the ideal complement for Reber electric meat grinders that mount the bodies of meat grinders No. 5 - No. 12 - No. 22 - No. 32.

The knife is self-sharpening and is available in various sizes, to be selected according to the type of mincer you have (No. 5 - No. 12 - No. 22 - No. 32). You can choose the desired type of knife from the drop-down menu.

Technical specifications REBER INOX knife for electric meat grinder

• Made of AISI 420 stainless steel
• Designed for use on Reber electric mincers that mount mincer bodies No. 5 - No. 12 - No. 22 - No. 32
• Suitable for food contact
• Dimensions of mincing knife No. 5: diameter cm. 4.6; thickness cm. 0.9; central hole diameter cm. 1
• Dimensions of mincing knife No. 12: diameter cm. 6; thickness cm. 1; central hole diameter cm. 1.1
• Dimensions of mincing knife No. 22: diameter 7.2 cm; thickness 1.1 cm; central hole diameter 1.3 cm
• Dimensions of mincing knife No. 32: diameter 8.8 cm; thickness 1.3 cm; central hole diameter 1.5 cm
• Packaging in blister packs or cardboard boxes, bearing the bar code of the article

Attention! The photos of the plates shown are only indicative of the type of plate you will receive. In this case, in fact, photos of plates with 4.5 - 6 - 14 - 18 mm holes are shown. The hole pattern on the plate varies depending on the desired hole diameter, which can be selected using the drop-down menu visible at the top of the page.

Description REBER INOX knife for electric meat grinder

REBER INOX knife for electric meat mincer is made of AISI 420 stainless steel and is the ideal complement for Reber electric meat mincers that mount the bodies of mincers no. 5 - no. 12 - no. 22 - no. 32. This type of steel has excellent resistance to corrosion and oxidation, reaching quite high hardness values and maintaining good toughness characteristics. Visually, the surface of the knife gives a shiny polished effect. It is strongly recommended that if you wish to mount stainless steel plates on your mincer, you should also use a stainless steel knife in order to preserve the advantages of stainless steel..

It is important to always check that the knife is sharp. In fact, if the knife comes into contact with pieces of bone or rind, the blade edge may be damaged and the knife will have to be resharpened.

The knife must be mounted inside the body of the mincer, with the sharp side facing the plate.

The desired knife size can be selected from the drop-down menu.

Modalities of use REBER INOX knife for electric meat grinder

• Before use, the knife should be washed with lukewarm water
  
• After washing, the knife must be dried thoroughly
• After use, the knife should be washed thoroughly with lukewarm water and neutral soap; it should then be dried quickly
  
• Through the first cleaning, it is possible to remove dust, lamination and packaging residues that may lurk in the holes.
• Any residues of packaging material are normal and go away after the first wash.

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

Delivery time

This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!

REBER INOX plate electric meat mincer No. 32 is the ideal complement for Reber electric meat mincers that mount the body of mincer No. 32.

The plate is available with holes of different diameters, to be selected according to the type of meat to be minced. It is possible to choose the size of the hole diameter of each plate from the drop-down menu.

Technical specifications REBER stainless steel plate electric meat grinder No. 32

• Made of AISI 420 stainless steel
• Designed for use on Reber electric meat mincers that mount mincer body No. 32
• Suitable for food contact
• Size of each plate: diameter cm. 10; thickness cm. 1; central hole diameter cm. 1.5
• Available hole diameter sizes: mm. 3 - 4.5 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20
• Packaging in blister packs or cardboard boxes, bearing the bar code of the article

Attention! The photos of the plates shown are only indicative of the type of plate you will receive. In this case, in fact, photos of plates with 4.5 - 6 - 14 - 18 mm holes are shown. The hole pattern on the plate varies depending on the desired hole diameter, which can be selected using the drop-down menu visible at the top of the page.

Description REBER stainless steel plate electric meat grinder No. 32

REBER INOX plate electric meat mincer No. 32 is made of AISI 420 stainless steel and is the ideal complement for Reber electric meat mincers that mount the No. 32 mincer body, such as the REBER meat grinder No. 32 electric 1200 Watt 9504NSP. This type of steel has excellent resistance to corrosion and oxidation, achieving fairly high hardness values and maintaining good toughness characteristics. Visually, the surface of the plate gives a shiny polished effect.

It is important to use plates with holes appropriate to the meat to be minced. In fact, for relatively lean minced meat, a plate with holes of 4.5, 6 or 8 mm can be used. For sausage or black pudding, a plate with holes of 8 to 12 mm is suitable, while for salami mixture, plates with holes of 10 mm or more are traditionally used. For fatty meats or mixed meats with large amounts of fat, it is traditional to first use a plate with large holes for a first pass and make a second pass with a plate with smaller holes. It should also be noted that using a plate with holes that are too small may slow down the grinding process and heat up the meat.

You can select the size of the hole diameter of each plate from the drop-down menu. If you own a REBER No. 32 electric mincer, please note that a plate with 10 mm holes is fitted as standard.

Modalities of use REBER stainless steel plate electric meat grinder No. 32

• Before use, the straightener should be washed with lukewarm water
  
• After washing, the plate must be dried thoroughly
• After use, the hotplate must be washed thoroughly with lukewarm water and neutral soap; it must then be dried quickly
  
• Through the first cleaning, it is possible to remove dust, lamination and packaging residues that may lurk in the holes.
• Any residues of packaging material are normal and go away after the first wash.

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

Delivery time

This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!

REBER INOX plate electric meat mincer No. 12 is the ideal complement for Reber electric meat mincers that mount the No. 12 mincer body.

The plate is available with holes of different diameters, to be selected according to the type of meat to be minced. It is possible to choose the size of the hole diameter of each plate from the drop-down menu.

Technical specifications REBER INOX plate electric meat grinder No. 12

• Made of AISI 420 stainless steel
• Designed for use on Reber electric meat mincers that mount mincer body No. 12
• Suitable for food contact
• Size of each plate: diameter cm. 6.9; thickness cm. 0.8; central hole diameter cm. 1
• Available hole diameter sizes: mm. 3 - 4.5 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20
• Packaging in blister packs or cardboard boxes, bearing the bar code of the article

Attention! The photos of the plates shown are only indicative of the type of plate you will receive. In this case, photos of plates with 4.5 - 10 - 14 - 16 - 20 mm holes are shown. The hole pattern on the plate varies depending on the desired hole diameter, which can be selected using the drop-down menu visible at the top of the page.

Description REBER INOX plate electric meat grinder No. 12

REBER INOX plate electric meat mincer No. 12 is made of AISI 420 stainless steel and is the ideal complement for Reber electric meat mincers that mount the No. 12 mincer body, such as the REBER meat grinder No. 12 electric 500 W HP 0.40 9501N. This type of steel has excellent resistance to corrosion and oxidation, achieving fairly high hardness values and maintaining good toughness characteristics. Visually, the surface of the plate gives a shiny polished effect.

It is important to use plates with holes appropriate to the meat to be minced. In fact, for relatively lean minced meat, a plate with holes of 4.5, 6 or 8 mm can be used. For sausage or black pudding, a plate with holes of 8 to 12 mm is suitable, while for salami mixture, plates with holes of 10 mm or more are traditionally used. For fatty meats or mixed meats with large amounts of fat, it is traditional to first use a plate with large holes for a first pass and make a second pass with a plate with smaller holes. It should also be noted that using a plate with holes that are too small may slow down the grinding process and heat up the meat.

You can select the size of the hole diameter of each plate from the drop-down menu. If you own a REBER No. 12 electric mincer, please note that a plate with 6 mm holes is fitted as standard.

Modalities of use REBER INOX plate electric meat grinder No. 12

• Before use, the straightener should be washed with lukewarm water
  
• After washing, the plate must be dried thoroughly
• After use, the hotplate must be washed thoroughly with lukewarm water and neutral soap; it must then be dried quickly
  
• Through the first cleaning, it is possible to remove dust, lamination and packaging residues that may lurk in the holes.
• Any residues of packaging material are normal and go away after the first wash.

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

Delivery time

This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!

REBER INOX plate electric meat mincer No. 22 is the ideal complement for Reber electric meat mincers that mount the No. 22 mincer body.

The plate, made of AISI 420 stainless steelis available with holes of different diameters, to be selected according to the type of meat to be minced. It is possible to choose the size of the hole diameter of each plate from the drop-down menu.

If you wish, you can also purchase a AISI 420 stainless steel knife (select No. 22 from the drop-down menu) for your Reber electric meat grinder.

Technical specifications REBER INOX plate electric meat grinder No. 22

• Made of AISI 420 stainless steel
• Designed for use on Reber electric meat mincers that mount mincer body No. 22
• Suitable for food contact
• Size of each plate: diameter cm. 8.2; thickness cm. 0.9; central hole diameter cm. 1.1
• Available hole diameter sizes: mm. 3 - 4.5 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20
• Packaging in blister packs or cardboard boxes, bearing the bar code of the article

Attention! The photos of the plates shown are only indicative of the type of plate you will receive. In this case, photos of 1 plate with 10 mm holes and photos of 1 plate with 6 mm holes are shown. For example, if you purchase a plate with 20 mm holes, the holes on the plate will be considerably smaller.

However, the arrangement and number of holes on the plate may vary.

Description REBER INOX plate electric meat grinder No. 22

REBER INOX plate electric meat mincer No. 22 is made of AISI 420 stainless steel and is the ideal complement for Reber electric meat mincers that mount the No. 22 mincer body, such as the REBER meat grinder No. 22 electric 600 W HP 0.80 9500N classic model or REBER meat grinder No. 22 electric 600 W HP 0.80 9500NC short model. This type of steel has excellent resistance to corrosion and oxidation, achieving fairly high hardness values and maintaining good toughness characteristics. Visually, the surface of the plate gives a shiny polished effect.

It is important to use plates with holes appropriate to the meat to be minced. In fact, for relatively lean minced meat, a plate with holes of 4.5, 6 or 8 mm can be used. For sausage or black pudding, a plate with holes of 8 to 12 mm is suitable, while for salami mixture, plates with holes of 10 mm or more are traditionally used. For fatty meats or mixed meats with large amounts of fat, it is traditional to first use a plate with large holes for a first pass and make a second pass with a plate with smaller holes. It should also be noted that using a plate with holes that are too small may slow down the grinding process and heat up the meat.

You can select the size of the hole diameter of each plate from the drop-down menu. If you own a REBER No. 22 electric mincer, please note that a plate with 8 mm holes is fitted as standard.

Below are some photos of the plates that can be purchased (the arrangement and number of holes on the plate may vary from the plate you receive; the only data to consider before purchasing is the diameter of the holes you wish to receive).

Modalities of use REBER INOX plate electric meat grinder No. 22

• Before use, the straightener should be washed with lukewarm water
  
• After washing, the plate must be dried thoroughly
• After use, the hotplate must be washed thoroughly with lukewarm water and neutral soap; it must then be dried quickly
  
• Through the first cleaning, it is possible to remove dust, lamination and packaging residues that may lurk in the holes.
• Any residues of packaging material are normal and go away after the first wash.

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

Delivery time

This product is normally available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore in Italy are free of freight charges (except for shipments to particularly inconvenient areas)!

If you are purchasing from outside Italy, the system calculates flat-rate shipping costs. If you notice that, in relation to the weight of your chosen product, the shipping costs seem excessive or disproportionate, finalise your order without paying and contact us! We will evaluate and, if necessary, adjust the shipping fee abroad!

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

All payments are handled through Paypal. Moreover, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your data in the appropriate fields. The system is encrypted and protected and your data will not be given to ElettroWebStore in any way. In fact, ElettroWebStore can only see if your payment has been made or not and only the information that you decide to enter!

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!